MK7 Golf GTI

1. This is a FLUSH fitting rear wiper delete kit.

Please do not mistake our product for a cheap plumbers rubber bung.
Our kit gives you that smooth, clean, OEM+ deleted finish.

You will receive:

1 X Flush fitting wiper delete plug.
1 X Detailed printed fitting instructions.
1 X 15ml Waterproof sealant in a syringe (Black).

Fits many makes and models in the VW & Audi Range

Please contact us if you are unsure this will fit your model of car!

• Model: CTS-IT-270-R
• Manufactured by: CTS Turbo

VTA MQB Highflow inlet elbow.

This product is designed to replace the factory plastic inlet elbow which is known to cause restriction within the intake system, especially evident when power/boost is being turned up.

Product features:

• High flow mandrel bent piping, CNC machined flanges
• Compatible with any intake system, including stock
• Black powdercoat finish
• Simple installation
• Faster turbo spool, more air flow, improved turbo sound! 
• Inlet ID is 66mm Outlet ID is 54mm (Measured as accurate as we can be!)

Fits below models of cars

2015+ Mk7 Golf GTI/R
2015+ Audi A3/S3 8V

Part Number: 06H905110

Manufacturer: OEM / Audi Original Factory Equipment

Application(s): This coil pack is from the 8V RS3. These coilpacks can also be used as an upgrade for FSI or TFSI Gen3 engines (this means they fit your MQB Car!). These are also less likely to get stuck in the spark plug holes due to excessive heat. If you're unsure if it will fit your vehicle, please contact us to confirm.

Description: This is a set of four (4) genuine coil packs. If you're comparing on price, be sure you're looking at genuine OEM coilpacks. Many available on the Australian market look the same, but are not OEM. You can tell by the printing stamped on the upper side of the connector (as pictured). 

The oil pan, located on the bottom of the engine block holds your engine's oil. In an effort to save money, Volkswagen and Audi constructed the factory oil pan on the 2.0TSI Generation 3 out of plastic. This creates a hazard especially if your car is lowered. One wrong move and you could find yourself with a cracked oil pan or worse a blown engine and thousands of dollars in damages. Even the oil pan on a car at stock ride height could crack if you can't avoid that debris in the road.

In order to provide you with piece of mind the experts at VTA have assembled the Steel Oil Pan Conversion Kit. With this kit you can easily convert your engine to a steel oil pan which is far stronger than the factory plastic oil pan. The installation is straight forward and everything needed to complete the conversion is included.

• Each kit includes:
• Steel oil pan
• 20x Oil pan bolts
• Oil pan sealant
• Drain Plug

• Volkswagen GTI (2006-2019) 2.0T TSI
• Volkswagen Golf R (2015-2019) 2.0T TSI
• Volkswagen Golf (2006-2019) 1.8T TSI
• Volkswagen Jetta (2006-2019) 2.0T TSI
• Volkswagen Jetta (2006-2019) 1.8T TSI
• Volkswagen Alltrack (2016-2019) 1.8T TSI
• Volkswagen Beetle (2012-2018) 1.8T TSI
• Volkswagen Beetle (2012-2018) 2.0T TSI
• Volkswagen Passat (2012-2018) 1.8T TSI
• Volkswagen Passat (2012-2018) 2.0T TSI
• Volkswagen Tiguan (2009-2018) 2.0T TSI
• Audi A3 (2005-2018) 2.0T TSI
• Audi S3 (2015-2018) 2.0T TSI
• Audi TT (2008-2015) 2.0T TSI
• Audi TTS (2018-2019) 2.0T TSI
• Audi Q3 (2015-2019) 2.0T TSI

Product Description

After over a year in our R&D department finalising the design, fit and finish, Forge Motorsport are proud to present a carbon fibre intake for the latest 1.8 and 2.0 TSI EA888 engines. It combines a highly unique, desirable and attractive look with an ability to offer real-world horsepower increases. Although  the VW/Audi group got their intake pretty good, we were able to force feed even more cold air into our intake by running it the full width of the slam panel, and exploiting the cold air ducts that VW/Audi put in from the factory, but don’t use.

The genuine carbon fibre is finished ‘dry’, meaning unlaquered, just like the carbon fibre you see in motorsport applications. This requires a higher quality fibre with no defects, and a higher attention to detail when the intake is manufactured. This results in a true premium product for your car which far exceeds other intakes at the same price point, and embarrasses those priced even higher.

It offers greater sound from the engine, particularly when on boost, and our product testers have reported a more responsive throttle too. The filter element itself is provided by Pipercross, and is fully serviceable or replaceable if necessary. In our testing, it was the only filter type that was able to offer adequate filtration to the engine, whilst still being capable of flowing enough air to offer an increase in horsepower and torque.

The kit comes complete with everything you need for installation, which can be carried out in around 30 minutes, including a set of full colour instructions.

Product code: FMINDMK7

Introducing the V-tech Package you need for your MQB platform car!

In this package we offer the V-tech MQB Intake inlet elbow and the V-tech Turbo Muffler delete.

Commonly these mods are completed together. The inlet elbow removes the factory restrictive OEM plastic inlet for our Same Inner diameter, better flowing replacement.

The turbo muffler delete removes the factory turbo muffler which is designed to mute the awesome turbo noise these cars produce, in doing so it also causes a disruption to smooth boosting, replacing this with out Turbo muffler delete increases boost noise but also removes this turbulence and gives a smoother boost build!

Must have mods for your MQB car!

We are proud to release the V-tech MQB Turbo Muffler Delete.

V-tech Australia has developed this Turbo Outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.

There is no permanent modifications required to fit our Turbo Muffler delete it is plug and play. Features a central o-ring and reuses the factory outter o-ring, ensuring the perfect seal!

OEM Turbo outlet pipe can be reused or an upgraded unit can be used - The choice is yours!

This product fits:
Golf Mk7 GTI
Gofl Mk7R
Polo 1.8TSI (2015-)
Audi S1 2.0TSI
Audi S3 (8V)

• Model: CTS-IT-275
• Manufactured by: CTS Turbo

Part Number: 06K905601M

Manufacturer: OEM / Audi Original Factory Equipment

Application(s): 4.0 TFSI engines from the C7 Audi RS6, RS7, and S8. Can also be used as an upgrade for EA888 Gen3 engines, such as found in the MK7 Golf GTI and R, as well as the 8V Audi S3. If you're not sure if this part will fit your vehicle, please send us a message and we can help figure it out.

Description: Set of 4 high performance spark plugs. 

Turbosmart's new Kompact Shortie Blow-Off Valve for VAG 2.0 TSI engines takes performance to the next level. These valves are a high performance replacement for the standard diverter valve fitted to the current 2.0 TSI range.

 Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package. 

 The Dual Port offers a 50/50 split between recirculating and vent-to-atmosphere, for quiet operation at low boost, and the high performance sound associated with vent-to-atmosphere BOVs at higher boost. The Dual Port also recirculates enough air to keep the car's ECU happy. 

 Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the turbo to operate to its full potential, and for longer

Application

Audi S3 2.0TSI 2013-current
Audi A3 2.0TSI 2013-current
Audi A6 2.0TSI 2015-current 
Audi TT 2.0TSI 2015-current
Audi Q3 2.0TSI 2015-current
Audi Q7 2.0TSI 2015-current
Seat Leon 2.0TSI 2014-current
Skoda Octavia RS 2.0TSI 2013-current
Skoda Superb 2.0TSI 2015-current
Volkswagen Golf GTI Mk7 2013-current
Volkswagen Golf R Mk7 2013-current

• Model: CTS-EXH-DP-0014
• Manufactured by: CTS Turbo