At CTS Turbo we are proud to announce our new air intake system for the VW MK7 Golf/GTI and MK7 Golf R is ready!
The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing. Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Peak power gains range from 10-15HP on an otherwise stock vehicle.
Product Details: - Mandrel bent large bore 3.5" aluminum piping with black powder coating - Coveted Laser etched //CTS Turbo logo - 3.5" Reusable air filter with inverted cone design - 4 Ply silicon connectors with stainless steel clamps - Sealed air box - Bracketry to prevent rattling under engine torquing
Manufactured by: CTS Turbo
Vtech MQB Highflow Turbo Inlet Elbow
VTA MQB Highflow inlet elbow.
This product is designed to replace the factory plastic inlet elbow which is known to cause restriction within the intake system, especially evident when power/boost is being turned up.
High flow mandrel bent piping, CNC machined flanges
Compatible with any intake system, including stock
Black powdercoat finish
Faster turbo spool, more air flow, improved turbo sound!
Inlet ID is 66mm Outlet ID is 54mm (Measured as accurate as we can be!)
Fits below models of cars
2015+ Mk7 Golf GTI/R 2015+ Audi A3/S3 8V
Set of 4 Audi 8V RS3 Ignition Coil Packs - 06H905110
Part Number: 06H905110
Manufacturer:OEM / Audi Original Factory Equipment
Application(s): This coil pack is from the 8V RS3. These coilpacks can also be used as an upgrade for FSI or TFSI Gen3 engines (this means they fit your MQB Car!). These are also less likely to get stuck in the spark plug holes due to excessive heat. If you're unsure if it will fit your vehicle, please contact us to confirm.
Description:This is a set of four (4) genuine coil packs. If you're comparing on price, be sure you're looking at genuine OEM coilpacks. Many available on the Australian market look the same, but are not OEM. You can tell by the printing stamped on the upper side of the connector (as pictured).
Forge Motorsport Carbon Fibre Intake Kit for Volkswagen, Audi, Seat, Skoda 2.0 TSI EA888 GEN 3
After over a year in our R&D department finalising the design, fit and finish, Forge Motorsport are proud to present a carbon fibre intake for the latest 1.8 and 2.0 TSI EA888 engines. It combines a highly unique, desirable and attractive look with an ability to offer real-world horsepower increases. Although the VW/Audi group got their intake pretty good, we were able to force feed even more cold air into our intake by running it the full width of the slam panel, and exploiting the cold air ducts that VW/Audi put in from the factory, but don’t use.
The genuine carbon fibre is finished ‘dry’, meaning unlaquered, just like the carbon fibre you see in motorsport applications. This requires a higher quality fibre with no defects, and a higher attention to detail when the intake is manufactured. This results in a true premium product for your car which far exceeds other intakes at the same price point, and embarrasses those priced even higher.
It offers greater sound from the engine, particularly when on boost, and our product testers have reported a more responsive throttle too. The filter element itself is provided by Pipercross, and is fully serviceable or replaceable if necessary. In our testing, it was the only filter type that was able to offer adequate filtration to the engine, whilst still being capable of flowing enough air to offer an increase in horsepower and torque.
The kit comes complete with everything you need for installation, which can be carried out in around 30 minutes, including a set of full colour instructions.
CTS Turbo is pleased to release our high flow turbo outlet pipe kit MK7 GTI, MK7 Golf R, 2015+ A3 and S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel bent 2.5" aluminum tubing. The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharge compressor housing and factory intercooler.
Turbosmart Kompact Shortie Dual Port - EVR05 TS-0203-1063
Turbosmart's new Kompact Shortie Blow-Off Valve for VAG 2.0 TSI engines takes performance to the next level. These valves are a high performance replacement for the standard diverter valve fitted to the current 2.0 TSI range.
Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package.
The Dual Port offers a 50/50 split between recirculating and vent-to-atmosphere, for quiet operation at low boost, and the high performance sound associated with vent-to-atmosphere BOVs at higher boost. The Dual Port also recirculates enough air to keep the car's ECU happy.
Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the turbo to operate to its full potential, and for longer
Audi S3 2.0TSI 2013-current Audi A3 2.0TSI 2013-current Audi A6 2.0TSI 2015-current Audi TT 2.0TSI 2015-current Audi Q3 2.0TSI 2015-current Audi Q7 2.0TSI 2015-current Seat Leon 2.0TSI 2014-current Skoda Octavia RS 2.0TSI 2013-current Skoda Superb 2.0TSI 2015-current Volkswagen Golf GTI Mk7 2013-current Volkswagen Golf R Mk7 2013-current
Vtech MQB Turbo Muffler Delete (EA888 engine)
We are proud to release the V-tech MQB Turbo Muffler Delete.
V-tech Australia has developed this Turbo Outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
There is no permanent modifications required to fit our Turbo Muffler delete it is plug and play. Features a central o-ring and reuses the factory outter o-ring, ensuring the perfect seal!
OEM Turbo outlet pipe can be reused or an upgraded unit can be used - The choice is yours!
This product fits: Golf Mk7 GTI Gofl Mk7R Polo 1.8TSI (2015-) Audi S1 2.0TSI Audi S3 (8V)
Audi RS7 Performance Spark Plugs - Genuine VW 06K905601M (Set of Four)
Manufacturer:OEM / Audi Original Factory Equipment
Application(s):4.0 TFSI engines from the C7 Audi RS6, RS7, and S8. Can also be used as an upgrade for EA888 Gen3 engines, such as found in the MK7 Golf GTI and R, as well as the 8V Audi S3. If you're not sure if this part will fit your vehicle, please send us a message and we can help figure it out.
Description:Set of 4 high performance spark plugs.
Vtech MQB Inlet and Turbo Muffler Delete Package
Introducing the V-tech Package you need for your MQB platform car!
In this package we offer the V-tech MQB Intake inlet elbow and the V-tech Turbo Muffler delete.
Commonly these mods are completed together. The inlet elbow removes the factory restrictive OEM plastic inlet for our Same Inner diameter, better flowing replacement.
The turbo muffler delete removes the factory turbo muffler which is designed to mute the awesome turbo noise these cars produce, in doing so it also causes a disruption to smooth boosting, replacing this with out Turbo muffler delete increases boost noise but also removes this turbulence and gives a smoother boost build!
Must have mods for your MQB car!
CTS Turbo MQB (MK7/8V A3/S3) Throttle Pipe
CTS Turbo is pleased to offer the ultimate high flow throttle pipe kit for the MK7, 8V Audi A3 and S3. The OEM Charge pipping leaves something to be desired with inefficient bends, and blockages not optimized for performance. The CTS Turbo throttle pipe increases the entired diameter to 2.5" allowing for increased flow and greater performance. The integrated water methanol bung (1/8" NPT) allows for simple and straight forward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Product Details: - Mandrel bent aluminum piping with durable black powder coating - CNC machined MAP flange - 4 Ply silicon connectors with stainless steel clamps - Integrated water methanol bung with plug - Stainless steel clamps
This product fits the following applications: - 2014+ Audi S3 - 2014+ Audi S3 - MK7 Golf, GTI, Golf R